Garage doors have a lot of moving parts that can wear down over time, so it’s important to regularly check and lubricate the door’s hinges, rollers, springs and tracks. You should also tighten any bolts or screws that have come loose. If your garage door starts making noise or doesn’t open and close as smoothly as it used to, it’s time for some garage door maintenance.
garage door repair can be tricky, so it’s best to leave it to the professionals if you’re not sure what you’re doing. garage door maintenance is important to keeping your garage in good condition and preventing more serious issues down the road. Here are some pointers to help you determine when it’s appropriate to tackle things yourself and when you’ll need assistance.
The following garage door issues can usually be resolved without outside help. Check out these instructions for fixing your garage door by yourself.
If your garage door goes out in the middle of a power outage, you will lose power to it. During a power outage, it is feasible to open your garage door manually. Before attempting to disconnect the opener from the door, ensure that the garage door is closed.
If you need to open your garage door manually, first find the emergency release cord – it’s the red rope hanging from the trolley. If that doesn’t work, it may be time to contact a professional for help.
Your garage door wall switch may be out of order, but it’s a simple task for you to complete on your own. The issue is most likely to do with the wiring or the switch itself. Remove the wires from your wall switch and check them carefully one by one.
If the opener opens when the wire touches, then it’s only a switch issue. If not, you’ll have to put new wires in. Electric work can be dangerous if you don’t know what you’re doing, so it might be best to ask for professional help.
There are a few potential causes if your garage door starts going up by itself, such as a problem with the garage door opener. Check your owner’s manual to learn how to change the frequency on your opener and repair it as needed. If reversing is happening too frequently, try cleaning the photo-eye sensors and removing obstructions from its path. However, if you believe it may be an electrical issue, play it safe and call in a professional electrician.